上海东方医院

您的当前位置: 网站首页 > 人才队伍 > PI介绍

Xiaoyan Gong

gongxiaoyan.jpg

龚霄雁 博士

国家千人计划(2015)

江苏省双创人才(2015)

苏州茵络医疗器械有限公司 总裁

CFDA人工心脏瓣膜标准委员会专家

教育背景:

1996年, 加州大学圣巴巴拉(University of California, Santa Barbara)      机械与环境工程系,博士

1990年, 北京大学研究生院力学系,硕士

1986年, 北京大学力学系,学士

 

工作经历:

2015.01-:上海市东方医院纳米医学应用技术研究所,PI

2013.07-:苏州茵络医疗器械有限公司 ,董事长

2012.11-:同济大学医学院,兼职教授

2006.08-:美国医用植入体力学有限公司,总裁

2003.03-2006.08:美国强生旗下镍钛合金器材和部件,总工程师

2000.10-2003.02:美国强生旗下镍钛合金器材和部件,主任工程师

1998.06-2000.10:美国苏尔寿医疗旗下碳医用公司,高级设计分析师

1996.05-1998.06:美国加州大学圣巴巴拉材料系,博士后研究员

1992.07-1996.04:美国加州大学圣巴巴拉机械与环境工程系,助理研究员

1991.08-1992.06:美国加州大学圣巴巴拉机械与环境工程系,助理教员   

1998.09-1990.09:中国北京大学力学系,助理研究员  

1986.07-1988.08:中国西安冶金建筑学院环境工程系,助教

 

获得奖项:

2015年入选第十二批国家“千人计划”专家;

2015年获江苏省创新创业人才称号;

2014年获评姑苏领军人才称号;

2012年获得苏州园区领军人才称号

 

技术协会:

美国FDA专家顾问,中国人工心脏瓣膜标准委员会专家

ISO血管支架行业标准技术委员会专家委员

美国机械工程师协会(ASME)小微结构专业委员会专家成员;形状记忆和超弹性技术协会(SMST)会员

美国检测方法协会(ASTM)会员,组织制定了“fatigue to fracture & Beyond”工作组,解决行业疲劳预测难题

 

发表文章:

1. S. Gupta, A. R. Pelton, J. D. Weaver, X. -Y. Gong, S. Nagaraja, “High compressive pre-strains reduce the bending fatigue life of nitinol wire”, J Mech Behav Biomed Mater, 44, 2015.

2.A. Prasad, N. Xiao, X. -Y. Gong, C. K. Zarins, C. A. Figueroa, “A computational framework for investigating the positional stability of aortic endografts”, Biomechanics and Modeling in Mechanobiology Volume 12, Issue 5, pp 869-887, October, 2013.

3.X.-Y. Gong, D. J. Chwirut, M. R Mitchell, B. D. Choules and K. J. Cavanaugh, “Fatigue to Fracture - An Informative, Fast, and Reliable Approach for Assessing Medical Implant Durability”, Journal of ASTM International, Paper ID: JAI102412, July, 2009.

4.A. R. Pelton, V. Schroeder, M.R. Mitchell, X.-Y. Gong, M. Barney and S.W. Robertson, “Fatigue and Durability of Nitinol Stents”, Journal of the Mechanical Behavior of Biomedical Materials, 2, April, 2008.

5.A. Mehta, X.-Y. Gong, V. Imbeni, A. R. Pelton and R. O. Ritchie, "Understanding the Deformation and Fracture of Nitinol Endovascular Stents Using In Situ Synchrotron X-ray Microdiffraction", Adv. Mater. 19, p1183, 2007.

6.S. W. Robertson, X.-Y. Gong, and R. O. Ritchie, “Effect of Product Form and Heat Treatment on the Crystallographic Texture of Austenitic Nitinol”, Journal of Materials Science, Vol. 41, pp621-630, 2006.

7.X.-Y. Gong, F.W. Zok, B.N. Cox, and J.B. Davis, "Chain Composites with High Energy Absorption: I. Theory of the Localization/Delocalization Transition", Acta Mater. Vol. 48, (2000) .

8.B.N. Cox, J.B. Davis, N. Sridhar, F.W. Zok, and X.-Y. Gong, "Chain Composites with High Energy Absorption: II. Demonstrations and Potential", Acta Mater. Vol. 48, (2000) .

9.X. Gong and D.R. Clarke, "On the Measurement of Strain in the Wrinkled Coatings Formed on an Elastic Substrate", Oxidation of Metals. Vol. 50, (5/6), (1998).

10.X. Gong and Z. Suo, "Reliability of Ceramic Multilayer Actuators: A Nonlinear Finite Element Simulation", J. Mech. Phys. Solids. Vol. 44, (5), (1996).

11.S. Robertson, R. O. Ritchie, A. Mehta, X.–Y. Gong and A. R. Pelton, “Ultrahigh-resolution In Situ Diffraction Characterization of the Local Mechanics at a Growing Crack Tip in Nitinol”, Proceedings of the international conference on Shape Memory and Superelastic Technologies, Pacific Grove, California, USA, p35-42, 2006.

12.C. Trepanier, X.-Y. Gong, T. Ditter, R. Grishaber and A. R. Pelton, "Effect of Fretting and Crevice Corrosion on the Performance of Stents", Proceedings of the international conference on Shape Memory and Superelastic Technologies, Pacific Grove, California, USA, p265-275, 2006.

13.J. Stankiewicz, S. W. Robertson, X.-Y. Gong, H. R. Wenk, and R. O. Ritchie. “Effects of Texture on the Fatigue Resistance of Nitinol”, Tenth International Congress & Exposition of the Society for Experimental Mechanics; Costa Mesa, California, USA; Session 54: Nitinol II, Paper No. 453. June 7-10, 2004.

14.N. Rebelo, X. Gong, A. Hall, A.R. Pelton and T.W. Duerig, “Finite Element Analysis on Nitinol’s Cyclic Property”, Proceedings of 2004 Abaqus World User’s Conference.

15.S. Robertson, J. Stankievicz, X. –Y. Gong and R. O. Ritchie, “Cyclic Fatigue of Nitinol”, Proceedings of the Materials & Processes for Medical Devices Conference, Barden-Barden, Germany, p79-88, 2004.

16. N. Rebelo, X.-Y. Gong, A. Hall, A. R. Pelton, “Finite Element Analysis on the Cyclic Properties of Superelastic NiTinol”, Proceedings of the Materials & Processes for Medical Devices Conference, Barden- Barden, Germany, p157-163, 2004.

17. A. Wick, X.-Y. Gong, J. Fino, J. Sheriff and A. R. Pelton, “Bending fatigue Characteristics of Nitinol”, Proceedings of the Materials & Processes for Medical Devices Conference, Barden-Barden, Germany, p89- 94, 2004.

18.X.-Y. Gong, A. R. Pelton, T. Duerig and A. Hall, “Cyclic Properties of Superelastic Nitinol Tubing”, Proceedings of the Materials & Processes for Medical Devices Conference, pp. 26-31, 2004.

19. A.R. Pelton, X. Gong and T.W. Duerig, “Fatigue Testing of NiTi on Diamond-Shaped Specimens”, SMST- 2003, [Proceedings of the International Conference on Shape Memory and Superelastic Technologies], edited by Alan R. Pelton and Tom Duerig, (Pacific Grove, CA, USA, May 5-8, 2003), pp 293-302.

20. X. Gong, Alan R. Pelton, Tom W. Duerig, Nuno Rebelo and Ken Perry “Finite Element Analysis and Experimental Evaluation of Superelastic Nitinol Stent”, SMST-2003, pp 453-462.

21. X. Gong and A.R. Pelton, “ABAQUS Analysis on Nitinol Medical Applications”, Proceedings of 2002 ABAQUS User’s Conference, pp. 1-10.

22.X. Gong and J. Thornton, "Stress Analysis on Intra-Cardiac/Great Vessel Repair", 2000 ABAQUS International User's Conference, pp. 371-386.

23.X. Gong, H. Yu, Z. Suo and R. M. McMeeking, "Cracking in Ferroelectric and Antiferroelectric Ceramic Multilayer Actuators", Proceedings of the ASME Aerospace Division. Edited by Xhang, J.C.I.; Coulter, J.; Brei, D.; Martinez, D.; Ng, W.; and Freidmann, P.P., AD-Vol. 52, pp703-712. 1996.

24.  X. Gong and Z. Suo, "A Nonlinear Finite Element Method for Electrostrictive Ceramic Multilayer Actuators - a Comparison of Capacitor-type and Slit Structure", US-Japan Workshop on Smart Materials and Structures. Proceedings of the First US-Japan Workshop. (Seattle, WA, USA, 3-4 Dec. 1995.) Edited by: Inoue, K.; Shen, S.I.Y.; Taya, M.; Warrendale, PA, USA. TMS, pp169-179, 1996


Xiaoyan Gong

gongxiaoyan.jpg

龚霄雁 博士

国家千人计划(2015)

江苏省双创人才(2015)

苏州茵络医疗器械有限公司 总裁

CFDA人工心脏瓣膜标准委员会专家

教育背景:

1996年, 加州大学圣巴巴拉(University of California, Santa Barbara)      机械与环境工程系,博士

1990年, 北京大学研究生院力学系,硕士

1986年, 北京大学力学系,学士

 

工作经历:

2015.01-:上海市东方医院纳米医学应用技术研究所,PI

2013.07-:苏州茵络医疗器械有限公司 ,董事长

2012.11-:同济大学医学院,兼职教授

2006.08-:美国医用植入体力学有限公司,总裁

2003.03-2006.08:美国强生旗下镍钛合金器材和部件,总工程师

2000.10-2003.02:美国强生旗下镍钛合金器材和部件,主任工程师

1998.06-2000.10:美国苏尔寿医疗旗下碳医用公司,高级设计分析师

1996.05-1998.06:美国加州大学圣巴巴拉材料系,博士后研究员

1992.07-1996.04:美国加州大学圣巴巴拉机械与环境工程系,助理研究员

1991.08-1992.06:美国加州大学圣巴巴拉机械与环境工程系,助理教员   

1998.09-1990.09:中国北京大学力学系,助理研究员  

1986.07-1988.08:中国西安冶金建筑学院环境工程系,助教

 

获得奖项:

2015年入选第十二批国家“千人计划”专家;

2015年获江苏省创新创业人才称号;

2014年获评姑苏领军人才称号;

2012年获得苏州园区领军人才称号

 

技术协会:

美国FDA专家顾问,中国人工心脏瓣膜标准委员会专家

ISO血管支架行业标准技术委员会专家委员

美国机械工程师协会(ASME)小微结构专业委员会专家成员;形状记忆和超弹性技术协会(SMST)会员

美国检测方法协会(ASTM)会员,组织制定了“fatigue to fracture & Beyond”工作组,解决行业疲劳预测难题

 

发表文章:

1. S. Gupta, A. R. Pelton, J. D. Weaver, X. -Y. Gong, S. Nagaraja, “High compressive pre-strains reduce the bending fatigue life of nitinol wire”, J Mech Behav Biomed Mater, 44, 2015.

2.A. Prasad, N. Xiao, X. -Y. Gong, C. K. Zarins, C. A. Figueroa, “A computational framework for investigating the positional stability of aortic endografts”, Biomechanics and Modeling in Mechanobiology Volume 12, Issue 5, pp 869-887, October, 2013.

3.X.-Y. Gong, D. J. Chwirut, M. R Mitchell, B. D. Choules and K. J. Cavanaugh, “Fatigue to Fracture - An Informative, Fast, and Reliable Approach for Assessing Medical Implant Durability”, Journal of ASTM International, Paper ID: JAI102412, July, 2009.

4.A. R. Pelton, V. Schroeder, M.R. Mitchell, X.-Y. Gong, M. Barney and S.W. Robertson, “Fatigue and Durability of Nitinol Stents”, Journal of the Mechanical Behavior of Biomedical Materials, 2, April, 2008.

5.A. Mehta, X.-Y. Gong, V. Imbeni, A. R. Pelton and R. O. Ritchie, "Understanding the Deformation and Fracture of Nitinol Endovascular Stents Using In Situ Synchrotron X-ray Microdiffraction", Adv. Mater. 19, p1183, 2007.

6.S. W. Robertson, X.-Y. Gong, and R. O. Ritchie, “Effect of Product Form and Heat Treatment on the Crystallographic Texture of Austenitic Nitinol”, Journal of Materials Science, Vol. 41, pp621-630, 2006.

7.X.-Y. Gong, F.W. Zok, B.N. Cox, and J.B. Davis, "Chain Composites with High Energy Absorption: I. Theory of the Localization/Delocalization Transition", Acta Mater. Vol. 48, (2000) .

8.B.N. Cox, J.B. Davis, N. Sridhar, F.W. Zok, and X.-Y. Gong, "Chain Composites with High Energy Absorption: II. Demonstrations and Potential", Acta Mater. Vol. 48, (2000) .

9.X. Gong and D.R. Clarke, "On the Measurement of Strain in the Wrinkled Coatings Formed on an Elastic Substrate", Oxidation of Metals. Vol. 50, (5/6), (1998).

10.X. Gong and Z. Suo, "Reliability of Ceramic Multilayer Actuators: A Nonlinear Finite Element Simulation", J. Mech. Phys. Solids. Vol. 44, (5), (1996).

11.S. Robertson, R. O. Ritchie, A. Mehta, X.–Y. Gong and A. R. Pelton, “Ultrahigh-resolution In Situ Diffraction Characterization of the Local Mechanics at a Growing Crack Tip in Nitinol”, Proceedings of the international conference on Shape Memory and Superelastic Technologies, Pacific Grove, California, USA, p35-42, 2006.

12.C. Trepanier, X.-Y. Gong, T. Ditter, R. Grishaber and A. R. Pelton, "Effect of Fretting and Crevice Corrosion on the Performance of Stents", Proceedings of the international conference on Shape Memory and Superelastic Technologies, Pacific Grove, California, USA, p265-275, 2006.

13.J. Stankiewicz, S. W. Robertson, X.-Y. Gong, H. R. Wenk, and R. O. Ritchie. “Effects of Texture on the Fatigue Resistance of Nitinol”, Tenth International Congress & Exposition of the Society for Experimental Mechanics; Costa Mesa, California, USA; Session 54: Nitinol II, Paper No. 453. June 7-10, 2004.

14.N. Rebelo, X. Gong, A. Hall, A.R. Pelton and T.W. Duerig, “Finite Element Analysis on Nitinol’s Cyclic Property”, Proceedings of 2004 Abaqus World User’s Conference.

15.S. Robertson, J. Stankievicz, X. –Y. Gong and R. O. Ritchie, “Cyclic Fatigue of Nitinol”, Proceedings of the Materials & Processes for Medical Devices Conference, Barden-Barden, Germany, p79-88, 2004.

16. N. Rebelo, X.-Y. Gong, A. Hall, A. R. Pelton, “Finite Element Analysis on the Cyclic Properties of Superelastic NiTinol”, Proceedings of the Materials & Processes for Medical Devices Conference, Barden- Barden, Germany, p157-163, 2004.

17. A. Wick, X.-Y. Gong, J. Fino, J. Sheriff and A. R. Pelton, “Bending fatigue Characteristics of Nitinol”, Proceedings of the Materials & Processes for Medical Devices Conference, Barden-Barden, Germany, p89- 94, 2004.

18.X.-Y. Gong, A. R. Pelton, T. Duerig and A. Hall, “Cyclic Properties of Superelastic Nitinol Tubing”, Proceedings of the Materials & Processes for Medical Devices Conference, pp. 26-31, 2004.

19. A.R. Pelton, X. Gong and T.W. Duerig, “Fatigue Testing of NiTi on Diamond-Shaped Specimens”, SMST- 2003, [Proceedings of the International Conference on Shape Memory and Superelastic Technologies], edited by Alan R. Pelton and Tom Duerig, (Pacific Grove, CA, USA, May 5-8, 2003), pp 293-302.

20. X. Gong, Alan R. Pelton, Tom W. Duerig, Nuno Rebelo and Ken Perry “Finite Element Analysis and Experimental Evaluation of Superelastic Nitinol Stent”, SMST-2003, pp 453-462.

21. X. Gong and A.R. Pelton, “ABAQUS Analysis on Nitinol Medical Applications”, Proceedings of 2002 ABAQUS User’s Conference, pp. 1-10.

22.X. Gong and J. Thornton, "Stress Analysis on Intra-Cardiac/Great Vessel Repair", 2000 ABAQUS International User's Conference, pp. 371-386.

23.X. Gong, H. Yu, Z. Suo and R. M. McMeeking, "Cracking in Ferroelectric and Antiferroelectric Ceramic Multilayer Actuators", Proceedings of the ASME Aerospace Division. Edited by Xhang, J.C.I.; Coulter, J.; Brei, D.; Martinez, D.; Ng, W.; and Freidmann, P.P., AD-Vol. 52, pp703-712. 1996.

24.  X. Gong and Z. Suo, "A Nonlinear Finite Element Method for Electrostrictive Ceramic Multilayer Actuators - a Comparison of Capacitor-type and Slit Structure", US-Japan Workshop on Smart Materials and Structures. Proceedings of the First US-Japan Workshop. (Seattle, WA, USA, 3-4 Dec. 1995.) Edited by: Inoue, K.; Shen, S.I.Y.; Taya, M.; Warrendale, PA, USA. TMS, pp169-179, 1996


上海市东方医院 纳米医学应用技术研究所

Designed by  红爵科技